Cat5e Ethernet Cable 24 AWG Plenum Wire: All You Need To Know

Welcome to the buyer guide of Cat5e ethernet cable that will help you in identifying the right cable for your setup. First, let’s break down the steps to know the characteristics of the cable. Later, I will describe the cat5e internal structure and the conductor specs, its jacket ratings (Plenum), and last but not least, the benefits and the specs of the Cat5e cable 1000ft for your network.

In addition to this, let’s know the dos and don’ts of ethernet cable that will prevent accidental damage to the cable during installations.

What Is Cat5e Ethernet Cable?

In Cat5e ‘e’ is referred to as enhanced – so, the cat5e is an enhanced version of its previous cable Cat5 with gigabit speed and the highest bandwidth to support your network. The internal structure of the cable is a twisted pair – eight separated color-coded wires twisted tightly together to form 4 twisted pairs. These twisted pairs are made up of bare copper to provide you with lightning-fast conductivity and performance.

If we talk about the cat5e cable 1000ft speed, this cable shows an enhanced upgrade in its speed specs. At 100 meters (328ft), the cable’s maximum speed is 100 Mbps, and if we reduce the length to 50 meters, the maximum networking speed is 1000 Mbps. 

The cable is also tested with a proven bandwidth speed of 350 MHz to support fast ethernet applications. This is the most common cable used in networking catering to all your cabling needs and requirements.

Types Of Cat5e Cable

Split the cable into two main types according to the need for installation in different locations and environments. The two variants of Cat5e bare copper cable are – Shielded and unshielded. 

Shielded bare copper cat5e cable seems to be the most protective cable due to the presence of an additional insulation layer beneath the cable sheath. Two types of shielding are found in the Cat5e cable 1000ft whether on twisted pairs or throughout the cable length to prevent EMI and RFI from entering the cable.

These cables are mostly demanded when there is a need to deploy cables in complex wiring structures. The additional layer of foil or braid acts as a barrier for external signals to limit the signal quality. 

Unshielded – cat5e ethernet cables are the general cable that is used to install in office and home networks with minimum resistance to EMI and RFI. The UTP cables lack any additional layers and thus are more flexible and easy to install. The UTP Cat5e cable 1000ft also resists crosstalk and attenuation to provide you with noise-free performance. 

There are two possible installation locations within the building – riser space and plenum space. Here, I will discuss the plenum space of the building and the type of jacket to meet the specifications of the cable. 

Cat5e Plenum Pure Copper Cable

While installing ethernet cables within the building some factors are considered before buying the cable – the outer jacket of the cable. Plenum spaces have more airflow and oxygen supply so the chances of fire progression are very high. These spaces include HVAC systems, air ducts, ventilation, etc.

As for the plenum jacket, it is made up of flame-retardant material (Fluorinated Ethylene Polymers). This material is highly fire resistant and also in case of fire provides an obstacle in fire progression. The non-toxic smoke properties of plenum cable make it viable to install in horizontal spaces like air ducts, above-raised floors, drop ceilings, etc.

The Cat5e plenum pure copper cable is also UV-resistant and can be used for outdoor installation in case your budget is not specified. 

Specifications Of Cat5e Cable 1000ft

The cat5e has very salient specs on which every network user adopts this cable to fulfill the cabling needs and network requirements. As for bare copper conductors, it is flexible and malleable thus making your installation more easy and effortless. The 100% copper advances to deliver an accurate transfer speed and allows electric current to pass without degradation. 

Other than this there are various specs mentioned in the table

These are the additional specifications of the cat5e plenum pure copper cable which might raise your interest to buy this cost-effective cable. 

Benefits of Using Cat5e Plenum Pure Copper Cable

The Cat5e ethernet cable is ideal with all these benefits within a cable that may alter your mind about buying any other cable for your network. All these advantages are to secure your networking needs. The major benefits are as follows;

• Plenum-rated safety
  • The bare copper cat5e cable plenum jacket meets the fire safety standards — it’s flame-retardant and non-toxic smoke properties make this cable ideal to use in the plenum spaces of the building.
• Pure copper conductor
  • Bare copper Cat5e cable is marked with the finest and superior conductivity to provide a fast transmission speed to your network as compared to CCA cables.
• High data transfer rates
  • With cat5e cable 1000ft, you can get gigabit speed to seamlessly work within your organization. Pure copper offers the highest data transmission to send files quickly.
• Backward compatibility
  • The cable uses RJ45 to connect to the network equipment so there is no harm in using this enhanced category cable for your network.
• Versatility
  • The Cat5e plenum pure copper cable can be installed in the riser (CMR) spaces of the building providing full protection to your network infrastructure.
• Longevity
  • After deploying Cat5e ethernet cable in the proper arrangement and managed there is no need to replace the cables for years as they have a long lifespan. The cat5e cable will provide your network with stable speed and performance for years.
• Reliability and performance
  • The Cat5e plenum cable helps in reducing the crosstalk and attenuation to provide your network with efficient speed and conductivity. Pure copper cable cat5e cable delivers proficient data transfer speed.

Also, the bare copper cat5e cable supports multiple applications to run for our daily needs that may cater to the following;

• 10/100/1000BASE-T
• Ethernet networking
• Voice over Internet Protocol (VoIP)
• IP security cameras (PoE)
• Wireless access points (WAPs)
• Building automation systems
• Audio-Video systems (A/V)
• Digital Signage
• Network IP Intercom system
• Point-of-sale (POS) system
• Gaming consoles

Final Thought

Before going to buy ethernet cable it is important to have some firm knowledge about the cable characteristics and for that reason, this is a brief information about the Cat5e ethernet cable and its benefits. The backward-compatible bare copper cat5e cable is a cost-effective solution for your network. 

If you are looking for Cat5e plenum pure copper cable in an affordable range then look no further than New York Cables – the platform of quality network cables and accessories for your network. All our cables meet industry standards so there is no need to worry about the performance of the cable. Good luck with your purchase.